GZ60T2 Tube Fiber Laser Cutting Machine
October 2, 2018
GZ1530CG1 Fiber Laser Cutting Machine with housing and exchange table for both tube and plate cutting
October 2, 2018
Show all

GZ1530C1 Fiber Laser Cutting Machine for both tube and plates cutting

Product Introduction

The model GZ1530C1 fiber laser cutting machine is designed for both tube and plates cutting. It consists of machine tool, motion parts, electrical equipment control parts, and other assist parts. Via control system to operation three axis motion parts, so it can drive to fiber laser cutting head achieve a stable, accurate, and high speed moving; X and Y axis adopt by imported with original packaging high quality and precision HIWIN linear guide rail, working table adopt by square pipe to welding the overall machine, stress relief annealing treat, the max load-bearing of mesa could get 500 KG, it also has universal ball bearing, machine external set up peripheral clamping device, use full enclosed dust proof device, photoelectric sensor, and other precise positioning parts to ensure accuracy of the transmission.

It has been widely used in manufacture billboard, sheet metal structure, high-low voltage electric cabinet, textile machinery, kitchenware, metal artwork, etc.; processing material like Stainless steel, carbon steel, Silicon steel, alloy steel, spring steel, copper, aluminum sheet, Zinc alloyed sheet, etc.


Main Configuration

Transmission and Precision

  • Atlantad double gear and rack transmission from Germany
  • X,Y axis are equipped with Yaskawa double AC servo motor and drive from Japan
  • German Neugart reducer or French MOTOREDCER
  • High precision HIWIN guide rail from Taiwan
  • High Precision TBI ball screw transmission for Z axis from Taiwan
  • Schneider Electric Relays
  • Professional Cypcut control system

Clamp Design

It adopts an electric clamp design on both sides and it can modulate the center automatically. The diagonal adjustable range is 20-200mm.

Fractional Automatic Support Installation

It employs intelligent tube support design, which can solve the deformation problems in the process of long tube cutting.

Auto Focus Cutting Head

·  Auto Focusing

The software automatically adjusts the focusing lens to realize automatic perforating and cutting plates of different thickness. The speed of automatically adjusting focus lens is ten times of the manual adjusting.

· Bigger Adjustment Range

Adjustment range -10 mm~ +10mm, precision 0.01mm, suitable for 0 ~ 20mm different types of the plates.

· Long Life Span

Collimator lens and focus lens both have water-cooling heat sink which reduces the temperature of the cutting head to improve the life span of the cutting head.

Aviation Aluminum Gantry

It is manufactured with aerospace standards and formed by 4300 tons press extrusion molding. After aging treatment, its strength can reach 6061 T6 which is the strongest strength of all gantries. Aviation aluminum has many advantages, such as good toughness, light weight, corrosion resistance, anti-oxidation, low density, and greatly increase the processing speed.

The Segmented Rectangular Tube Welded Bed

The internal structure of the bed adopts the aircraft metal honeycomb structure, which is welded by a number of rectangular tubes. Stiffeners are arranged inside the tubes to increase the strength and tensile strength of the bed, and it also increases the resistance and stability of the guide rail to effectively avoid the deformation of the bed.

  • High strength, stability, tensile strength, ensuring 20 years of use without distortion
  • Thickness of rectangular pipe wall is 10mm and weights 4500 kg

Independent Control Cabinet

  • Dust-proof

All electrical components and laser source are built-into the independent control cabinet with a dust -proof design to prolong the lifespan of the electrical components.

  • Automatic Thermostat

The control cabinet is equipped with air conditioner for automatic constant temperature. This can prevent excessive temperature damage to components in summer.

Technical Parameters

Model Type GZ1530C1-500W GZ1530C1-750W GZ1530C1-1000W
Laser Generator Imported/Chinese fiber laser generator
Laser power 500W 750W 1000W
Working area 1500*3000mm
Max. speed 0-20m/min(Depending on the material and thickness)
Repeat positioning accuracy ±0.02mm
X-axis travel 1525mm
Y-axis travel 3025mm
Z-axis travel 100mm
Acceleration 1.5G
Rotary device 3m/6m, tube diameter 20~200mm
Transmission Germany high precision gear with double driving rack
Cutting thickness ≤6mm ≤8mm ≤10mm
Total power consumption <10KW <12KW <14KW
Power supply 380V/50Hz~60Hz
Gross weight 5500KGs


Fiber Laser Cutting Machine Features

  • It employs intelligent tube support design, which can solve the deformation problems in the processing of long tube cutting.
  • It adopts an electric clamp design on both sides and it can modulate the center automatically. The diagonal adjustable range is 20-200mm.
  • Moved crossbeam with imported high precision racks and linear guide rail, transmission stable, working with high precision.
  • Machine tool, crossbeam and worktable adopt integral welding structure, machine tool, crossbeam and worktable adopt integral welding structure, in accordance with the standard large machine, to stress annealing after precision finishing and then for vibration aging treatment, it can completely eliminate the welding stress and processing stress, keep high-strength, high precision, and also keep the 20 years of normal use without deformation.
  • X, Y and Z axis use imported Japan servo motor, high precision, high speed, large torque and large inertia, performance is stable and durable, ensure the high speed operation of the whole machine.
  • Based on Windows operating system, use professional Cypcut numerical control system for fiber laser cutting machine, integrated with laser cutting control special function module which is powerful with a good man-machine interface and easy to operate.
  • Laser-produced without gas, it could use air to cut sheet metal.

Fiber Laser Cutting Machine Application

  • Applicable to fast cutting on plate or tube in metal, mainly for cutting on SS, carbon steel, Manganese steel, galvanized plate, alloy plate, rare metal.
  • Widely used in kitchen appliance, electric control box, high-resolute device, mechanical equipment, electrical equipment, lighting, posters, auto parts, display equipment, hardware and metal processing.
Reviews (0)


There are no reviews yet.

Be the first to review “GZ1530C1 Fiber Laser Cutting Machine for both tube and plates cutting”

Your email address will not be published. Required fields are marked *